Hem » Produkter » DimLight Pulse

Tillbaka till Webbshop

Click to enlarge

DimLight Pulse

ID accessory

To be used with an encoder.

Kategorisering

Medical
Add to wishlist
Overview

This is to be used with an encoder.

By using an encoder in an application the real feedback to the end user can be made, both by the eyes and by the vibration inside the encoder that are felt during dimming.

  1. Connector 1 Power in
  2. Connector 2 I/O to Optodrive LED module type ID
  3. Connector 3 To the Pulse Switch

Accesories to DimLight Pulse

Encoder

The Encoder is connected to the DimLight Puilse with the 4-pole Switch-wire.

Wire SWITCH 4-pole

The 4-pole Switch-wire is used between the DimLight Pulse and the Encoder.

The 3-pole DIMLIGHT-wire is used between the LED-module and the DimLight Pulse.

ID LED-modules

Downloads