The new OptoDrive® SVEA is really versitile LED-light engine. Suitable for most high demanding needs.
Perfect light from warm white to cool white , easily fitted into light fittings such as downlights, spotlights, ambient fixtures etc. Svea is used where high light levels are necessary from a compact source.
Features
• FlickerFree (coming soon)
• Suitable for retail and medical applications
• Easy and safe mounting with connectors
• Long life-time 50 000 hours
SVEA AC 42
For built in lights
| Power | 12W |
|---|---|
| Flux | 1100lm |
| CRI | Ra>80 (Ra>90) |
| Optics | 130° Cover |
OptoDrive® SVEA 42 is a high intensity LED-engine developed for build in mount in opalized glass ceiling lights – and much more.
230VAC |
AC – No need for a driver |
| You are able to connect the LED-module directly to 230VAC mains and won’t need a bulky driver. This allows freedom to design slim fixtures without making place or need extra cables for a driver. And without an extra component there is less risk of failure. |
Consistant form factor |
 |
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
Related products
Svea AC
Svea ED
| Power | 12W |
|---|---|
| Flux | 1100lm |
| Power supply | AC: 230VAC direct to mains |
| Input voltage range | 220-240VAC |
| Surge protection (Volt) | 1000V on board |
| Over temp protection | 150°C |
| Efficiency | |
| Number of LED's | 42 |
| CRI | >Ra80, >Ra90 |
| Beam angle | 130° cover |
| SDCM | 3 |
| Module dimension (mm) | 82x92mm (hexagonal) |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Ceiling lamp, Outdoor |
Downloads
Svea AC 72
For built in lights
| Power | 20W | 32W |
|---|---|
| Flux | 2000lm | 3000lm |
| CRI | Ra>80 (Ra>90) |
| Optics | 130° Cover |
OptoDrive® SVEA 72 is a high intensity LED-engine developed for build in mount in opalized glass ceiling lights – and much more.
230VAC |
AC – No need for a driver |
| You are able to connect the LED-module directly to 230VAC mains and won’t need a bulky driver. This allows freedom to design slim fixtures without making place or need extra cables for a driver. And without an extra component there is less risk of failure. |
Consistant form factor |
|
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
Related products
Svea AC
Svea ED
| Power | 20W | 32W |
|---|---|
| Flux | 2000lm | 3000lm |
| Power supply | AC: 230VAC direct to mains |
| Input voltage range | 220-240VAC |
| Surge protection (Volt) | 1000V on board |
| Over temp protection | 150°C |
| Efficiency | |
| Number of LED's | 72 |
| CRI | >Ra80, >Ra90 |
| Beam angle | 130° cover |
| SDCM | 3 |
| Module dimension (mm) | 82x92mm (hexagonal) |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Ceiling lamp, Outdoor |
Downloads
Svea AC 2Ch
For corridor and sensor lights
| Power | 2/23W (2 Channel) |
|---|---|
| Flux | 200/2000lm |
| CRI | Ra>80 (Ra>90) |
| Optics | 130° Cover |
OptoDrive® SVEA AC 2 Channel is a LED-engine especially developed for corridors. It has a safety mode with 200lm.
230VAC |
AC – No need for a driver |
| You are able to connect the LED-module directly to 230VAC mains and won’t need a bulky driver. This allows freedom to design slim fixtures without making place or need extra cables for a driver. And without an extra component there is less risk of failure. |
Consistant form factor |
|
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
Related products
Svea AC
Svea ED
| Power | 2/23W (2 channel) |
|---|---|
| Flux | 200/2000lm |
| Power supply | AC: 230VAC direct to mains |
| Input voltage range | 220-240VAC |
| Surge protection (Volt) | 1000V on board |
| Over temp protection | 150°C |
| Efficiency | |
| Number of LED's | 72+12 |
| CRI | >Ra80, >Ra90 |
| Beam angle | |
| SDCM | 3, 4 |
| Module dimension (mm) | 82x92mm (hexagonal) |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Ceiling lamp |
Downloads
Svea AC COB
For ceiling lights and spotlights
| Power | 16W | 20W | 32W |
|---|---|
| Flux | 1600lm | 1900lm | 3000lm |
| CRI | Ra>80 |
| Optics | 130° Cover |
OptoDrive® SVEA COB is a high intensity LED-engine developed ceiling lights and spotlights.
230VAC |
AC – No need for a driver |
| You are able to connect the LED-module directly to 230VAC mains and won’t need a bulky driver. This allows freedom to design slim fixtures without making place or need extra cables for a driver. And without an extra component there is less risk of failure. |
Consistant form factor |
|
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
Related products
Svea AC
Svea ED
| Power | 16W | 20W | 32W |
|---|---|
| Flux | 1600lm | 1900lm | 3000lm |
| Power supply | AC: 230VAC direct to mains |
| Input voltage range | 220-240VAC |
| Surge protection (Volt) | 1000V on board |
| Over temp protection | 150°C |
| Efficiency | |
| Number of LED's | COB |
| CRI | >Ra80, >Ra90 |
| Beam angle | 130° Cover |
| SDCM | |
| Module dimension (mm) | 82x92 hexagonal |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Ceiling lamp, Spotlight |
Downloads
Svea ED 77
For built in lights
| Power | 25W (700mA) |
|---|---|
| Flux | 2100lm (700mA) |
| CRI | Ra>90 |
| Optics | 130° Cover |
OptoDrive® SVEA ED is a high output LED-engine for use with external driver.
External driver |
ED-External driver required |
| Certain applications require more functionality on driver. In this case, the LED-module is stripped of components – all features are located to an external driver. This might be the case when you connect the fixtures to a big network with for example either Dali or DMX. |
Consistant form factor |
|
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
Related products
Svea AC
Svea ED
| Power | 25W (700mA) |
|---|---|
| Flux | 2100lm (700mA) |
| LED current (optimal) (mA) | 700mA |
| Power supply | ED: External driver |
| Efficiency | |
| Over temp protection | 150°C |
| Number of LED's | 77 |
| CRI | >Ra90 |
| Beam angle | 130° |
| SDCM | 3, 4 |
| Module dimension (mm) | 82x92mm (hexagonal) |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Ceiling lamp, Outdoor, Tasklight |
Downloads
Svea ED 12
For spotlights and tasklights
| Power | 27W (700mA) |
|---|---|
| Flux | 1600lm (700mA) |
| CRI | Ra>90 |
| Optics | 17° | 80° TOD |
OptoDrive® SVEA ED is a high output LED-engine for use with external driver.
External driver |
ED-External driver required |
| Certain applications require more functionality on driver. In this case, the LED-module is stripped of components – all features are located to an external driver. This might be the case when you connect the fixtures to a big network with for example either Dali or DMX. |
Consistant form factor |
|
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
Related products
Svea AC
Svea ED
| Power | 27W (700mA) |
|---|---|
| Flux | 1600lm (700mA) |
| LED current (optimal) (mA) | 700mA |
| Power supply | ED: External driver |
| Efficiency | |
| Over temp protection | 150°C |
| Number of LED's | 12 |
| CRI | >Ra90 |
| Beam angle | 17° | 80° TOD |
| SDCM | 3 |
| Module dimension (mm) | 83x96mm (hexagonal) |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Downlight, Spotlight, Tasklight |
Downloads
SVEA ID Medical:7
For medical examination light
| Power | 10W | 15W |
|---|---|
| Flux | 1000lm | 1400lm |
| CRI | Ra:96 (R9:98) |
| Optics | 9°/16° | 12°/22° |
OptoDrive® SVEA ID:7 is an LED-engine with built in driver with exceptionell stability and quality for examination light.
Low voltage |
ID - built in driver |
| For our low voltage solutions we mount the driver directly on board. For customers in need of quality DC LED-modules, for example high-end design or medical. We have a range of assessories branded DimLight with dimming for PWM, encoders or Dali connectability. |
Consistant form factor |
|
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
| Power | 10W | 15W |
|---|---|
| Flux | 1000lm | 1400lm |
| CRI | Ra:96 (R9:98) |
| Beam angle | 9°/16° | 12°/22° |
| Illuminance | >25000lx (15W, 9°) |
| Power supply | ID: Internal driver |
| Input voltage range | 12-36VDC, 24-36VDC |
| Efficiency | |
| Over temp protection | |
| Number of LED's | 7 |
| SDCM | |
| Module dimension (mm) | 83x85.5mm |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Medical |
Downloads
SVEA ID Medical:12
For medical examination light
| Power | 17W | 30W |
|---|---|
| Flux | 1360lm | 1900lm |
| CRI | Ra:96 (R9:98) |
| Optics | 9°/16° | 12°/22° |
OptoDrive® SVEA ID:12 is an LED-engine with built in driver with exceptionell stability and quality for examination light and minor surgery.
Low voltage |
ID - built in driver |
| For our low voltage solutions we mount the driver directly on board. For customers in need of quality DC LED-modules, for example high-end design or medical. We have a range of assessories branded DimLight with dimming for PWM, encoders or Dali connectability. |
Consistant form factor |
|
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
| Power | 17W | 30W |
|---|---|
| Flux | 1360lm | 1900lm |
| CRI | Ra:96 (R9:98) |
| Beam angle | 9°/16° | 12°/22° |
| Illuminance | 30000lx (30W, 9°) |
| Power supply | ID: Internal driver |
| Input voltage range | 24-36VDC |
| Efficiency | |
| Over temp protection | |
| Number of LED's | 12 |
| SDCM | |
| Module dimension (mm) | 83x85.5mm |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Medical |
Downloads
SVEA ID Medical:CCT
For minor surgery
| Power | 15W (30W) |
|---|---|
| Flux | 1170lm (2340lm) |
| CRI | Ra:96 (R9:98) |
| Optics | 9°/16° | 12°/22° |
OptoDrive® SVEA ID:12 CCT is an LED-engine with built in driver with exceptionell stability and quality for minor surgery. And with variable colour temperature.
Low voltage |
ID - built in driver |
| For our low voltage solutions we mount the driver directly on board. For customers in need of quality DC LED-modules, for example high-end design or medical. We have a range of assessories branded DimLight with dimming for PWM, encoders or Dali connectability. |
Consistant form factor |
|
Hexagonal shape |
| The hexagonal modules are designed to fit in round, square or hexagonal fittings. The hexagonal designs are available in three different versions – Felicia, Clara and Svea. The form factor is consistent over time, and is easy replaceable since the mounting holes are the same year after year. |
| Power | 15W (30W) |
|---|---|
| Flux | 1170lm (2340lm) |
| CRI | Ra:96 (R9:98) |
| Beam angle | 9°/16° | 12°/22° |
| Illuminance | 20000lx (15W, 9°) |
| Power supply | ID: Internal driver |
| Input voltage range | 24-36VDC |
| Efficiency | |
| Over temp protection | |
| Number of LED's | 12 |
| SDCM | |
| Module dimension (mm) | 83x85.5mm |
| Weight | |
| Connector | |
| Life length | |
| Ideal applications | Medical |